The Calibration Settings dialog contains options for screen display, digitizing tolerance, and digitizing button options. Note that many of these settings can be set after calibration by clicking the Tools | Project Settings command.
To set the calibration setting options:
Set the Vertex Tolerance to 200.
Set the Snap Tolerance to 200.
Verify the Tablet Button Settings list to determine which button is the Digitize button and which button is the Finish button on the puck.
Click Next to open the Specify Project Limits and Scale dialog.
Set the Vertex Tolerance and Snap Tolerance, if desired.
Back to RMS Calibration Settings
Next to Specify Project Limits and Scale